San Jose Building Performance Ordinance
The San Jose Energy and Water Building Performance Ordinance (BPO), also known as "Beyond Benchmarking," requires large commercial and multi-family buildings to demonstrate energy and water efficiency or implement improvement projects, contributing to San Jose's climate goals.
Pegasus is Your Trusted Partner for BPO “Compliance”
〰️
Pegasus is Your Trusted Partner for BPO “Compliance” 〰️
Ensure seamless San Jose BPO compliance for your properties with Pegasus. We proactively explore “Beyond Benchmarking” requirements, seeking exemptions to save you time and money. Should an audit be necessary, our team delivers a clear, ROI-focused report.
Join our growing list of satisfied clients. Talk to an experienced professional today:
The BPO Ordinance
The San Jose Building Performance Ordinance (BPO) requires owners of commercial and multifamily buildings over 20,000 square feet to file an Energy and Water Benchmark report annually by May 1st.
Beyond Benchmarking
In addition to the annual benchmark report, the building requires an energy and water audit or retro-commissioning (A/RCx) every 5 years unless it is exempt.
Buildings can qualify for an exemption:
Based on providing a Performance Verification Report for both Energy and Water. The Performance Exemption Report must be approved and signed by a licensed Architect or Professional Engineer.
Completing Title 24 Energy and Water Efficiency Improvement Measures. The measures must be installed and operational. A Level I (walkthrough) audit must be performed under the supervision of a licensed architect or Professional Engineer.
Energy Exemptions
The property can have one of the following options certified by a California-licensed engineer or architect, qualified auditor, or retro-commissioning professional.
-
The Property has a current LEED™ Certification
The Property has received an ENERGY STAR® Score of 75 or greater
The Property has improved its ENERGY STAR® Score by fifteen (15) points or more compared to its performance during the baseline year; or
The Property has a weather normalized site Energy Use that is twenty-five percent (25%) below the calculated mean for that property type; or
The Property has reduced its weather-normalized site Energy Use Intensity by at least fifteen percent (15%) compared to its performance during the baseline year.
-
An Owner of a Property which does not have a central cooling system may comply with the requirements of this by demonstrating two (2) of the following corresponding efficiency improvement measures listed below were completed
Comply with the California Building Standards Code (Title 24)
Title Installation of common area and exterior lighting fixtures
Installation of a domestic hot water heater
Replacement of all refrigerators on the Property to ENERGY STAR® Certified models
Replacement of all gas stoves on the Property to electric induction stoves
Replacement of all gas water heaters on the Property to electric heat pump or tankless water heaters
Installation of a smart thermostat
Installation of a solar thermal heating/cooling system;
Enrollment in a Department-approved utility demand response program;
Installation of insulation on all hot water pipes in accessible Property locations; or
Participation in a Department-approved Energy utility retrofit program (e.g., taking advantage of rebate or incentive programs for upgrades).
Water Exemptions
The property can have one of the following options certified by a California-licensed engineer or architect, qualified auditor, or retro-commissioning professional.
-
The building has received a US EPA Water Score of 75
The Property has improved its US EPA Water Score by fifteen (15) points or more relative to its performance during the baseline year
The Property has a Water Use Intensity as calculated by the Benchmarking Tool that is twenty-five percent (25%) below the locally calculated mean for that property type
The Property has reduced its Water Use Intensity by at least fifteen percent (15%) compared to its performance during the baseline year.
-
If the above requirements aren’t met, you may avoid the audit or retro-commissioning costs by adopting two (2) of the following water efficiency improvements.
Installation of plumbing such that all systems on the Property comply with Title 24.
Installation of outdoor landscaping and irrigation such that all systems on the Property are in compliance with San José Municipal Code Chapter 15.11, Water Efficient Landscape Standards for New and Rehabilitated Landscaping in effect at the time of the compliance cycle
Installation of a greywater system in accordance with California Code of Regulations, Title 24, Sections 1502.6, 1502.10.3, or as amended
Installation of insulation on all hot water pipes in accessible Property locations
Participation in an approved water utility retrofit program (e.g., taking advantage of rebate or incentive programs for upgrades).
There are some Exceptions and Exemptions to the Ordinance
Exceptions
The ordinance does not apply to:
Properties designated with an industrial land use zoning (Zones HI & LI)
Properties designated as Industrial Parks (Zone IP) that have 50% of gross floor area used exclusively for industrial, manufacturing, research, and design
Exemptions
A building owner is exempt from filing a benchmarking report for a reporting year if any of the following conditions apply:
The building did not have a Certificate of Occupancy during the reporting period
The building was unoccupied for the entire year due to renovations
A demolition permit had been issued, and demolition had begun
The building did not receive energy or water services for the entire calendar year.
The property was in financial distress
The disclosure of the property’s energy and water use data would result in the release of proprietary data that would violate a customer’s right to privacy
San Jose BPO FAQs
-
AB 802 covers both commercial and multi-family buildings over 50,000 square feet, but it does not include water benchmarking, nor does AB 802 require energy audits or “additional energy savings” actions. Exemptions and exceptions are not identical. See San Jose’s exemptions following.
-
Buildings owned by the State or Federal government
Buildings zoned as heavy or light industrial
Condominiums and individually owned townhomes
Financial distress - specific conditions must apply, such as:
The building is on the City’s annual tax lien sales within the prior two years
The building has a court-appointed receiver in control of assets due to financial distress
The building is owned by a financial institution via default by the borrower
The building has been acquired by a deed in lieu of foreclosure
The building has a senior mortgage subject to notice of default
Building Use/Occupancy
The building did not receive energy or water services for at least 30 days during the calendar year to be benchmarked
The building did not have a Certificate of Occupancy for Temporary Certificate of Occupancy for any portion of the calendar year to be benchmarked
The entire building was not occupied due to renovation for any portion of the calendar year to be benchmarked
A demolition permit for the entire building has been issued and demolition work has commenced on or before the data benchmarking compliance deadline
The disclosure of the building energy or water use would result in the release of proprietary information that can be characterized as a trade secret or would otherwise violate a customer’s right to privacy under the California Constitution or other applicable law
To apply for an exemption, complete the form at sanjoseca.gov/benchmarking and submit to benchmarking@sanjoseca.gov.
-
Yes, buildings may be granted an extension of time up to 60 days. An additional extension of up to 180 days may be granted upon demonstration of a substantial hardship. To apply for an extension complete the form at www.sanjoseca.gov/benchmarking.
-
The ordinance applies to “buildings” not “properties”. So, if no one building exceeds 20,000 square feet the ordinance is not applicable. However, there is one important exception. If two or more buildings share a common meter (with no submeter) such that the energy or water use for a single building cannot be determined, then the square footage of the buildings sharing that meter are summed to arrive at the 20,000 square foot requirement. For example, if a 9,000-square-foot building and an 11,000-square-foot building share a common meter, then the two buildings must be benchmarked as one.
-
In 2021, buildings 50,000 square feet and over, and in 2022, buildings 20,000 square feet and over will have “additional” requirements every five years:
Buildings must verify that they meet key performance standards through their annual benchmark reports by submitting a Performance Verification Report
If a building is not able to meet the energy or water standards, they must perform an audit, retuning, or completed targeted efficiency upgrades to improve performance,
Proof of compliance must be submitted on May 1st, once every five years. The schedule is based on the last digit of your building tax assessor parcel number.
-
A. The Property is new and has been occupied for less than five (5) years from its first compliance due date, based on its Temporary Certificate of Occupancy or Certificate of Occupancy; or
B. The Property has achieved one (1) or more of the Energy standards and one (1) or more of the water standards as set forth below for at least two (2) of the three (3) calendar years preceding the Property's compliance due date in Part 5:
Energy Standards: The Property has a current Leadership in Energy and Environmental Design (LEED™) Existing Buildings Operations and Maintenance v4 Certification; or a California licensed engineer or architect, or Qualified Auditor or Retro-Commissioning Professional certified at least at least one (1) of the following:
The Property has received an ENERGY STAR® Score of 75 or greater from the US EPA; or
The Property has improved its ENERGY STAR® Score by fifteen (15) points or more relative to its performance during the baseline year; or
The Property has a weather-normalized source Energy Use Intensity as calculated by the Benchmarking Tool that is twenty-five percent (25%) below the calculated mean for that property type; or
The Property has reduced its weather-normalized source Energy Use Intensity by at least fifteen percent (15%) relative to its performance during the baseline year.
Water Standards: A California licensed engineer or architect, or Qualified Auditor or Retro-Commissioning Professional certified at least one (1) of the following:
The building has received a US EPA Water Score of 75 from the US EPA;
The Property has improved its US EPA Water Score by fifteen (15) points or more relative to its performance during the baseline year;
The Property has a Water Use Intensity as calculated by the Benchmarking Tool that is twenty-five percent (25%) below the locally calculated mean for that property type; or
The Property has reduced its Water Use Intensity by at least fifteen percent (15%) relative to its performance during the baseline year.
If a Property has achieved both Energy and Water standards, the Owner must only submit a Performance Verification Report for that reporting year. If the Property only meets one (1) of the standards, the Owner shall submit a Performance Verification Report for the satisfactory standard and shall comply with this Chapter by completing one (1) of three (3) improvement pathway options for the unmet standard.
-
If you miss the annual May 1 deadline and have not been granted an extension or exemption, you may incur a monetary penalty for non-compliance:
Buildings under 50,000 square feet may be fined $25 for each day of non-compliance, up to $2500 per calendar year.
Buildings 50,000 square feet and over may be fined $50 for each day of non-compliance, up to $5000 per calendar year.
-
The instructions may be labeled as simple, however the EPA ENERGY STAR Portfolio Manager software is anything but “user friendly” or easy to use. There is a rather long and steep learning curve exemplified by PG&E’s 35-page instruction manual (or Los Angeles’ benchmarking manual is 84 pages).
Most building owner’s find that is it not the most efficient use of their or their employees time to learn the software for an annual report. That’s where we come in. Pegasus has been preparing energy benchmark reports since 2012. We have made the process as simple as possible. You give us some basic information about your building - and we do the work! Give us a call at 415-937-5046.
-
The ordinance requires the audit to be certified by a California-licensed engineer, architect, or Qualified Auditor / Retro-Commissioning Professional. If you have such talent in-house with the proper skill set, you may have your licensed professional sign off on the audit report. If you do not have that talent in-house or have a better use of their time, Pegasus can conduct your energy and water audit.
Benchmarking or Beyond —
Start Here and We’ll Guide You.
Not sure what applies to your building? Click below to get in touch — we’ll guide you.
🟦 Benchmarking
Annual compliance for AB 802, EBEWE, BPO, and other ordinances.
🟩 Beyond Benchmarking
Audits, exemptions, retro-commissioning, and ENERGY STAR certification.